Veron Coupe - 20" Vintage Rubber powered Model Plane Laser-cut Balsa Rib & Former Set

Veron 'Coupé' Combi-Kit ~ Laser-cut Parts Set

Note: This is not a complete kit. A plan is not included, and additional materials are required to complete the model.

Essentially all the cut parts to complete this aircraft using Veron’s “Combi-Kit” concept - a common sheet is used for the following aircraft ...

Veron Classic (2 shts), Veron Cadillac (1 sht), Veron Consul (1 sht), Veron Coupé (1 sht), Veron Corsair (1 sht)

This tubby little model is extremely appealing - if ever a rubber model could be called cuddly, then this is it! This model turns out to be rather a good performer.

Model specification

• Brand:                 Veron

• Design:               Junior “Combi-Kit” concept

• Type:                   Free flight sport model Glider

• Wing Span:        20"

The box contains the following 30 quality laser-cut parts

• 12 Wing Ribs laser-cut in hand-selected 1.5mm balsa

• 14 fuselage parts cut in hand-selected 1.5mm balsa

• 3 wing braces cut in 1.5mm hand-selected balsa

• 1 dihedral gauge cut in 1.5mm balsa

• No plan included. This is not a complete kit.

Plans are available for this model from Derick Scott @ https://www.ebay.co.uk/usr/flyer21uk

Please read the rest of the description below carefully as this is not a complete kit.

• The box contains laser-cut ribs/parts only.

• This is not a complete model kit.

• Additional materials will be required to complete the model.

• All photos are for illustration purposes only.

• The photo of laser-cut parts (blue background) shows exactly what you will receive in the box

• Building plans are not included

• Plans can be obtained from https://model-plans.co.uk/